Backup/Restore
Introduction
IMMAGE 800 Operations Manual A11403
Utilities
September 2016
Page 10-63
10
Backup/Restore
Introduction
The Backup/Restore option provides the ability to store data to a floppy disk or hard
disk for use at a later time.
Backup saves data to the hard disk or to a diskette for safe storage.
Restore takes previously backed up data from the hard disk or diskette and places it
back onto the system.
The instrument status must be in
Standby
in order to proceed with the steps below to
back up or restore data.
Backup
Follow the steps below to back up the database.
Step
Action
1
Select
Utilities
from the menu bar.
2
Select
<6> Backup/Restore
from the Utilities dialog box.
OR
Enter
6
in the
Option No.
field and press
[Enter]
.
Select…
to…
Backup to Diskette
Copy the database to a diskette.
When prompted, insert a diskette into
the floppy disk drive.
Backup to Hard Disk
Copy the database to the hard disk.
3
Select
<OK>
to back up the database.
OR
Select
<Cancel>
to exit and return to the Utilities screen.
4
When Backup is complete, a confirmation is displayed on the screen.
(Refer to Figure 10.32.)
Select
<OK>
to exit.
