Beckman Coulter IMMAGE 800, Operation Manual, Page: 365 / 536

Recalling Results by Patient ID
Introduction
IMMAGE 800 Operations Manual A11403 Results Recall
September 2016 Page 8-7
8
Recalling Results by Patient ID
Introduction
Results can be recalled by Patient ID or by Control ID.
Recalling by Patient ID
Follow the steps below to Recall a result by Patient or Control ID. Only one Patient or
Control ID may be requested at a time.
Step Action
1 Select Results from the menu bar. (Refer to Figure 8.1.)
2 Enter the Patient or Control ID (up to 15 alphanumeric characters) in the
Patient ID field.
3 Select the options button <
▼
> beside the Data Source field.
4 Select Computer to recall results in the current database stored in the hard
disk.
OR
Select Diskette to recall results from diskettes that have been restored into
the hard disk. (Refer to CHAPTER 10, Utilities , Backup/Restore for
instructions on how to back up and restore the database.)
NOTICE
Patient results restored from diskettes cannot be sent to the host.
5 Select a function button from the bottom of the screen.
6 Refer to Displaying Recalled Results on the Screen and Printing Recalled
Results in this chapter to display or print results.