Beckman Coulter IMMAGE 800 Operation Manual Download Page 352

Page: 352 / 536

Language Conversions

Kanji Text, Additional Information

Sample Programming

IMMAGE 800 Operations Manual A11403

Page 7-92

September 2016

Kanji Text, Additional Information

• To view the next set of Kanji candidates, press the

SPACE BAR

, or the down (

↓

)

arrow key.

• To view the previous set of Kanji candidates, press the up (

↑

) arrow key.

• The last Kanji character used always appears as candidate number one, until the

IMMAGE 800 system is rebooted.

• The number of Kanji choices found is displayed to the

right

of the Kanji choices

displayed, and the number associated with the numeric order is displayed to the

left

of the Kanji choices.

• The candidate Kanji character(s), displayed in the text field, is highlighted with

yellow until it is approved/inserted by the user.

• The candidate Kanji character(s) is entered into text when the

ENTER

key is

pressed, or the selection number for the Kanji choice, displayed at the bottom of the
screen, is entered by the user.

Note: If none of the Kanji character candidates are suitable, choosing the "0" option
will automatically cause the text to revert back to Hiragana.

Summary of Contents for IMMAGE 800
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for IMMAGE 800

Reviews:

Beckman Coulter IMMAGE 800, Operation Manual, Page: 352 / 536

Search results

Summary of Contents for IMMAGE 800

Reviews: