QC Log
Action Log
IMMAGE 800 Operations Manual A11403
Quality Control
September 2016
Page 9-25
9
Action Log
An Action Log comment, to be associated with a particular result, can be defined by
the operator.
The instrument status must be in
Standby
in order to proceed with the steps below.
Follow the steps below to associate a comment with a result.
7
A message appears to confirm the deletion of the result.
QC result will be deleted. Backup is suggested. Delete QC result?
Select
<OK>
to delete the result.
OR
Select
<Cancel>
to exit without deleting the result.
The deleted result is still displayed within the QC Log. It is marked as
deleted with the initials of the operator who deleted it. However, the data
point will no longer be included in any calculations or summaries.
Step
Action
, continued
(2 of 2)
Step
Action
1
From the Quality Control screen, select the control desired.
Use the
<Page Up>
/
<Page Down>
buttons to access additional controls.
2
Select
QC Log [F5]
.
3
Enter a Start date and an End date in the date range fields. The default
Start/End date is the current date. Select
<OK>
to choose the default. Use
[Tab]
to toggle between fields.
Select
<OK>
to continue.
OR
Select
<Cancel>
to exit.
4
Select the result by selecting the check box next to the result.
5
Select
*Action Log [F4]
.
6
The QC Action Log dialog box appears. Enter a maximum of 30
alphanumeric characters in the
Comment
field.
Select
<OK>
to save the comment in the database.
OR
Select
<Cancel>
to exit without saving the comment.
(1 of 2)
