Beckman Coulter IMMAGE 800, Operation Manual

Page: 144 / 536

Date and Time Setup
Introduction
System Setup IMMAGE 800 Operations Manual A11403
Page 5-44 September 2016
Date and Time Setup
Introduction
At installation the system requires the date and time to be set. After this, changing the
date or time is optional. The format of the date and time for the appropriate screens
and printouts may be changed as well.
Formatting the Date
The instrument status must be in Standby in order to proceed with the steps below to
format date parameters.
Step Action
1 From the Setup screen, select <9> Date/Time . (Refer to Figure 5.18.)
2 Format the order of the date by selecting the button beside Order .
Select either:
<1> Month Day Year
<2> Day Month Year
<3> Year Month Day
3 Format the day by selecting the button beside Day Format .
Select either:
<1> Leading Zero (01)
<2> No Leading Zero (1)
4 Format the month by selecting the button beside Month Format .
Select one:
<1> Leading Zero (01)
<2> No Leading Zero (1)
<3> Abbreviated Month (Jan)
<4> Full Month (January)
5 Format the year by selecting the button beside Year Format .
Select either:
<1> 2 Digits
<2> 4 Digits
(1 of 2)