Setting Variables
Introduction
IMMAGE 800 Operations Manual A11403
Sample Programming
September 2016
Page 7-37
7
Setting Variables
Introduction
Variables are used in Custom Calculations as placeholders in formulas to represent
more than one number (value). The numeric value of the variables can be entered on
the Set Variables screen.
A maximum of six variable values may be entered. The values apply only to the
current sample.
Setting the Variables
Follow the steps below to set the variables.
Additional Information
Refer to CHAPTER 5,
System Setup
, Calculations Setup, for more information on
special calculations.
Step
Action
1
Select the desired chemistry(ies) from the Program Sample screen.
2
Select
Sample Options [F3]
.
3
Select
<Set Variables>
.
4
Select an options button
<
▼
>
from the Set Variables dialog box.
5
Select the number beside the desired variable.
OR
Enter the number of the desired variable in the
Option No.
field.
OR
Select
<Cancel>
to return to the Set Variables dialog box.
6
Enter the value of the variable in the
Value
field and press
[Enter]
.
7
Select
<OK>
to set the variable and return to the Sample Options dialog
box.
OR
Select
<Cancel>
to return to the Sample Options dialog box without
setting the variable.
