Approving a Calibration
Editing the Time Range on a Robust Means Data Curve
IMMAGE 800 Operations Manual A11403
System Setup
September 2016
Page 5-111
5
Editing the Time Range on a Robust Means Data Curve
The time range can be edited on a Robust Means Data curve in order to focus on a
particular area of the curve. Perform the following steps to edit the time range.
Figure 5.57
Plot Robust Means Data Curve - Time Range Window
Step
Action
1
Refer to Figure 5.56 and select
Edit Time Range
on the Robust Means
Data Curve. A Time Range window appears as shown on Figure 5.57.
2
Enter the new starting time and ending time in the Time Range window.
The new starting/ending times must be within the original time range as
shown on the initial data curve.
3
A new Time Range screen appears that shows the edited times. Select
<OK>
to plot the new curve, and proceed to Step 4.
OR
Select
Default
to return to the original curve and time range.
OR
Select
<Cancel>
to return to the previous screen.
4
Select
<Exit>
to return to the Plot Robust Means Data Curve screen
OR
Select
<Edit Time Range>
again and repeat this procedure.
OR
Select
<Print>
to print the the Plot Robust Means Data Report.
OR
Select
[Ctrl, P]
on the keyboard
to print the Plot Robust Means Data
Curve.
E011440S.EPS
