How to Use This Manual
Procedure Tables
General Information/Precautions and Hazards
IMMAGE 800 Operations Manual A11403
Page 1-4
September 2016
Procedure Tables
Procedure tables are the most common type of table in this manual. They list each step
of a procedure by number with the corresponding action that is to be performed.
A "Refer to Figure x.x." instruction directs the operator to the screen that displays as a
result
of the action requested in the step.
Occasionally, a decision must be made at a step within a procedure. A smaller
decision table is then presented which describes the variable conditions in the left
column and the appropriate action for each condition in the right column.
Example of Procedure Table
The following table is an example of a procedure table that contains a decision table.
Read the decision table as complete sentences, using the first heading to introduce the
condition and the second heading to introduce the action. Step 2 of the table is read:
To enter individual Sample IDs, type the Sample IDs for rerun in the
Sample IDs
field.
To enter a range of Sample IDs, type the Sample ID at the beginning of the range in the
Range
field.
Step
Action
1
Select
Rerun Samples [F6]
. (Refer to Figure x.x.)
2
To enter...
type...
individual Sample IDs,
the Sample IDs for rerun in the
Sample IDs
field.
a range of Sample IDs,
the Sample ID at the beginning of
the range in the
Range
field.
3
Select a button from the bottom of the dialog box.
