Alcatel Omni Switch/Router, User Manual

Page: 298 / 1100

NTP Information Menu
Page 12-20
Flags Config
. This counter lists what flags have been configured for this
NTP
entity. For more
information about setting flags, see Set a System Flag (Auth, Bclient, Monitor, Stats) on page
12-35.
Reference Time
. This is the local time, in timestamp format, when the local clock was last
updated. If the local clock has never been synchronized, the value is zero.
Originate Timestamp
. This is the local time, in timestamp format, of the peer when its last
NTP
message was sent. If the peer becomes unreachable the value is set to zero.
Receive Timestamp
. This is the local time, in timestamp format, when the latest
NTP
message
from the peer arrived. If the peer becomes unreachable the value is set to zero.
Transmit Timestamp
. This is the local time, in timestamp format, when the last
NTP
message
was sent from this association.
Filter delay
.
NTP
comes with various filter routines as part of the algorithm that determines
timestamp information. This field shows the delay in seconds the
NTP
algorithm uses to
correct for delays caused by messages traversing through the NTP filters.
Filter offset
.
NTP
comes with various filter routines as part of the algorithm that determines
timestamp information. This counter indicates the offset of the peer clock relative to the local
clock due to filters.
Filter order
. The order in which
NTP
messages pass through filters.
Delay
. The currently estimated delay of this remote association, in seconds. This number indi-
cates the roundtrip delay of the peer clock relative to the local clock over the network path
between them, in seconds. Note that this variable can take on both positive and negative
values, depending on clock precision and skew-error accumulation. This time is determined
by the
NTP
algorithm.
Offset
. The currently estimated offset of this remote association, in seconds. This counter indi-
cates the offset of the peer clock relative to the local clock. This time is determined by the
NTP algorithm.
Disp
. The currently estimated dispersion of this remote association, in seconds. This counter
indicates the maximum error of the peer clock relative to the local clock over the network
path between them, in seconds. Only positive values greater than zero are possible. This time
is determined by the
NTP
algorithm.
Print Version Number
The
ntpvers
is used to show the version number of the xntp file. To display the version
number, enter the
ntpvers
command at the system prompt. A message similar to the follow-
ing is shown:
xntp Fri Apr 9 22:52:46 PDT 1999 (1)