Alcatel Omni Switch/Router, User Manual

Page: 224 / 1100

Displaying the MIB-II System Group Variables
Page 9-2
Displaying the MIB-II System Group Variables
MIB-II is a core set of definitions created to define the
SNMP
-based management framework.
This MIB module contains definitions for both end systems and routers using the Internet
protocol suite. To display the
MIB-II
system group variables, enter
ss
at the system prompt. A screen similar to the following will be displayed.
System description: Alcatel Omni Switch/Router
System Object ID: 1.3.6.1.4.1.800.3.1.1.2.
Agent Up Time: 5 days, 00:28:14.38
Contact: Administrator
Name: TechWrite
Location: Bldg 46
Device Services:
DataLink/Subnetwork Layer
Internetwork Layer
Host Layernetwork Layer
Application Layer (Rlogin, Telnet, FTP)
The fields displayed by the
ss
command are described below.
System description
. The specific type of chassis, which can be an OmniSwitch, OmniAccess, or
Omni Switch/Router. This field is set by the
syscfg
command, which is described in Configur-
ing System Information on page 9-23.
System Object ID
. The
MIB
entry for the switch (where the object
ID
starts). This is read only.
This value helps you locate Alcatel-specific variables in the
MIB
tree.
Agent Up Time
. The time (in days, hours, minutes, and seconds) since the switch was re-initial-
ized.
Contact
. The name of a person to contact about this switch. This field is set by the
syscfg
command, which is described in Configuring System Information on page 9-23.
Name
. The name the system administrator assigned to this switch (the node’s fully qualified
domain name, by convention). This field is set by the
syscfg
command, which is described in
Configuring System Information on page 9-23.
Location
. The physical location of the switch. This field is set by the
syscfg
command, which
is described in Configuring System Information on page 9-23.
Device Services
. The type of services provided by the switch. Supported service types are
listed below:
•
Data Link /Subnetwork Layer
•
Internetwork Layer
•
Host Layer
•
Application Layer (Rlogin Telnet, FTP)