manualshive.com logo in svg

Alcatel Omni Switch/Router, User Manual

Introducing the Alcatel Omni Switch/Router, a versatile networking solution designed to deliver seamless connectivity. Maximize your experience by easily accessing the comprehensive user manual, available for free download at manualshive.com. Discover the full potential of this product and optimize its features with the provided manual.

Share
Download
background image

 

 Table of Contents

 

page xvii

 

19   Managing Groups and Ports 

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-1

How Ports Are Assigned to Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-2

Static Port Assignment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-2
Dynamic Port Assignment (Group Mobility)   . . . . . . . . . . . . . . . . . . . . . .  19-2

How Dynamic Port Assignment Works  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-3

Mobile Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-5

Configuring Mobile Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-5

Turning Group Mobility On or Off  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-6

Understanding Port Membership in Mobile Groups . . . . . . . . . . . . . . . . . . . .  19-7

How a Device Is Dropped from the Default Mobile Group (def_group)  . .  19-9
How a Port’s Primary Mobile Group Changes (move_from_def)   . . . . . . .19-10
How a Port Ages Out of a Mobile Group (move_to_def)  . . . . . . . . . . . . .19-11

Configuring Switch-Wide Group Mobility Variables . . . . . . . . . . . . . . . . . . . .19-12
Viewing Ports in a Mobile Group  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-14
Viewing a Port’s Mobile Group Affiliations  . . . . . . . . . . . . . . . . . . . . . . . . . .19-14

Non-Mobile Groups and AutoTracker VLANs  . . . . . . . . . . . . . . . . . . . . . . . . . . .19-15

Routing in a Non-Mobile Group  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-15
Spanning Tree and Non-Mobile Groups  . . . . . . . . . . . . . . . . . . . . . . . . .19-16

Group and Port Software Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-17

Creating a New Group   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-18

Step 1. Entering Basic Group Information . . . . . . . . . . . . . . . . . . . . . . . . . . .19-19
Step 2. Configuring the Virtual Router Port (Optional) . . . . . . . . . . . . . . . . . .19-21
Step 3. Set Up Group Mobility and User Authentication   . . . . . . . . . . . . . . . .19-27
Step 4. Configuring Virtual Ports   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-28
Step 5. Configuring AutoTracker Policies (Mobile Groups Only)  . . . . . . . . . .19-34

Creating a WAN Routing Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-35

Viewing Current Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-38

Modifying a Group or VLAN  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-40

Viewing Your Changes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-41
Saving Your Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-41
Canceling Your Changes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-41
Changing the IP Address  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-41
Changing the IP Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-41
Enabling IP or IPX Routing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-42

Deleting a Group   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-43

Adding Virtual Ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-44

Modifying a Virtual Port   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-45

Deleting a Virtual Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-46

Viewing Information on Ports in a Group   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-47

Viewing Detailed Information on Ports   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-50

Viewing Port Statistics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-53

Viewing Port Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-55

Summary of Contents for Omni Switch/Router













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Omni Switch/Router

GE MDS SD Series Setup Manual preview
MDS SD Series
Brand: GE Pages: 4
Dahua DHI-NVR5224-24P-4KS2 Quick Start Manual preview
DHI-NVR5224-24P-4KS2
Brand: Dahua Pages: 24
Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
Paradyne Hotwire 6212 Quick Installation Instructions preview
Hotwire 6212
Brand: Paradyne Pages: 2
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
insys icom EBW-E Quick Installation Manual preview
EBW-E
Brand: insys icom Pages: 4
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Brand: Enterasys Pages: 58
ZyXEL Communications G-170S User Manual preview
G-170S
Brand: ZyXEL Communications Pages: 79
Network Critical SmartNA-X User Manual preview
SmartNA-X
Brand: Network Critical Pages: 200
ZyXEL Communications P-335U Specifications preview
P-335U
Brand: ZyXEL Communications Pages: 2
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Brand: i-MO Pages: 16
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
Rosco ND100 User Manual preview
ND100
Brand: Rosco Pages: 20
3Com NETBuilder SI Using Manual preview
NETBuilder SI
Brand: 3Com Pages: 212
Multiplex MULTIflight Stick Operating Instructions Manual preview
MULTIflight Stick
Brand: Multiplex Pages: 10
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
Gtran Wireless DotSurfer GPC-2100 User Manual preview
DotSurfer GPC-2100
Brand: Gtran Wireless Pages: 44

Brands by name

Popular brands

Load more brands