Alcatel Omni Switch/Router, User Manual

Page: 1023 / 1100

Backup Services Commands
Page 34-13
Idx
. The index number of the backup service.
Description
. Enter a description of the backup service in this field. Your description may
consist of a maximum of 30 ASCII characters.
Primary Type
. This field shows the type of entity that will be backed up in the case of network
failure. The available options are
Physical Port
and
Frame Relay PVC DLCI
.
Slot/Port/Dlci
. The slot, port number, and DLCI number (if applicable) attached to this backup
service.
Bkp Type
. This field shows the entity type to be used as a backup in the event of primary fail-
ure. At this time, the only available backup type is
PPP
.
Peer Id
. The identification number of the peer that has the backup port for this service.
Current State
. The current state of the backup service. The options for this are
Primary Up
,
Primary Down
,
Backup Up
,
Backup Down
,
Backup Initiated
.
Clearing Backup Service Statistics
To clear the statistics for a backup service, enter the
bsclear
command as shown:
bsclear b<backupIndex>
where
b<backupIndex>
is the service index number assigned to the service when it was
created. For example, to clear the statistics for a backup service with an index number of 1,
enter:
bsstatus b1
A prompt similar the following displays:
This will reset the statistic for Backup Index: 1
Continue ? {(Y)es, (N)o} (n) :
Enter
y
to clear the statistics.