Alcatel Omni Switch/Router, User Manual

Page: 216 / 1100

Managing User Login Accounts
Page 8-14
User Write Privileges
To assign privileges to a user account, you must be logged into an account with
WRITE
privi-
leges to the
USER
family of commands. Enter the following command at the system prompt.
user
userId
[write
list-of-families
]
where userId indicates the name assigned to the user account for which you want to assign
READ
and
WRITE
privileges. The list-of-families parameter indicates the switch command fami-
lies and the specific commands for which the user account will receive
READ
and
WRITE
privi-
leges. Command families must be separated by commas.
User Read Privileges
To assign
READ-ONLY
privileges to a user account, you must be logged into an account with
WRITE
privileges to the
USER
family of commands. Enter the following command at the
system prompt.
user
userId
[read
list-of-families
]
where userId indicates the name assigned to the new login account for which you want to
assign
READ-ONLY
privileges. The list-of-families parameter indicates the switch command
families and the specific commands for which the user account will receive
READ-ONLY
privi-
leges. For a list of command families and specific commands, refer to the ‘‘Assigning Account
Privileges Using the UI Command Mode’’ section on page 8-16 or to ‘‘Adding a User Account
Using the CLI Command Mode’’ on page 8-13.
Removing Privileges
You can remove
READ
and
WRITE
privileges from a user created login account if you are
logged into an account with
WRITE
privileges to the
USER
command family. Use the follow-
ing command:
user
userId
no write
list-of-families
You can remove
READ-ONLY
privileges from a user created login account by using the follow-
ing command:
user
userId
no read
list-of-families
For both these commands, the userId parameter indicates the name assigned to the user
created login account for which you want to remove privileges. The list-of-families parameter
indicates the switch command families and the specific commands from which you want to
remove
READ
or
WRITE
privileges.