Alcatel Omni Switch/Router, User Manual

Page: 266 / 1100

Displaying the Connection Entries in the MPM Log
Page 10-10
Displaying the Connection Entries in the MPM Log
The
conlog
command displays a list of connections made since console event,
FTP
, or Telnet
logging was activated by the
swlogc
command (described in Configuring Switch Logging on
page 10-6). To display this data, enter
conlog
at the system prompt. A screen similar to the following will be displayed.
User Line Peer Start Finish
-------- ----------- --------------- ---------------- ------------------
admin Telnet 198.206.187.113 08/14/00 09:47 - 09:47 (00:00)
admin Telnet 198.206.187.113 08/20/00 09:47 - 09:53 (00:05)
admin Telnet 198.206.187.113 08/20/00 09:55 - 10:00 (00:05)
admin console 08/20/00 10:35 logged in (00:27)
admin Telnet 198.206.187.113 08/20/00 11:02 logged in (00:00)
The fields displayed by the
conlog
command are described below.
User
. The name of the user who made the connection to the switch.
Line
. The login type of connection to the switch (e.g., a Telnet or console port connection).
Peer
. If the user was connected through Telnet, then the
IP
address of the user will be
displayed. If the user was connected through the console port, then this field will be blank.
Start
. The time that the connection started.
Finish
. Displays the time the connection terminated or
logged in
for sessions that are still
current. The value in parenthesis is the duration of the session, in minutes.