Tsino-Dynatron Electrical Technology (Beijing) Co., Ltd.
(Top/bottom/front/rear insulation distance for RC6 without fan) (Top/bottom/front/rear insulation distance for RC6 with fan)
(Top/bottom/front/rear insulation distance for RC6)
Figure 3.2-1.
Diagram of recommended minimum mounting distance for the drivers
Electrical Installation
3.3
Safety Information
3.3.1
Only trained and authorized qualified engineers should perform the external wiring of the servo drive.
The wiring must be consistent with the wiring diagram or instructions.
Do not touch the internal components of the servo drive, which may result in electric shock.
Check the voltage class of the servo drive carefully before power on, failure to do so may lead to personal
injury or equipment damage.
When the servo is powered up, no one is allowed to enter the range of mechanical movement to prevent
any possible personal injury.
The servo drive housing cannot be opened until all power supply has been reliably disconnected, and wait
for at least 10 minutes.
Make sure that the rated input voltage of the servo drive is consistent with the AC supply voltage before
use.
The servo drive has been through the puncture test before delivery, and the user should not perform this
test again.
3
Содержание EtherCAT CoolDrive RC Series
