Tsino-Dynatron Electrical Technology (Beijing) Co., Ltd.
Index Fault code Description
Type
Causes of faults
Handling Suggestions
5. Abnormal internal
current sampling circuits of
the drive
6. Abnormal brake circuit
of the drive
7. A smaller motor is
selected
8. The motor power line has
a bad connected or
disconnected phase
6. Check the motor
parameters and make sure
the parameters are properly
set (for example, the motor
rated current, the motor
overload protection
threshold, the motor fast
overload alarm time)
7. Use a motor with higher
capacity
8. Replace the drive
9. Check if the wiring of
motor power line is reliable
11
0xFF1D
Hardware STO1 is triggered
1
STO1 is triggered or bad
connection
1. Check STO1 wiring and
make sure it is reliably
connected
2. Make sure STO1 circuit
(such as emergency stop
switch) is not triggered
12
0xFF27
Hardware STO2 is triggered
1
STO2 is triggered or bad
connection
1. Check STO2 wiring and
make sure it is reliably
connected
2. Make sure STO2 circuit
(such as emergency stop
switch) is not triggered
13
0xFF08
Abnormal STO wiring
1
STO1/STO2 has a bad
connection
1. Check STO1/STO2
wiring and make sure it is
reliably connected
14
0xFF81
External faults of the drive
1
1. Faults with the other
shafts
2. Abnormal internal circuit
of the drive
1. Check the other shafts
and make sure there is no
fault
2. Detection for this fault
can be disabled by
modifying the servo
parameter 0x2094
3. Replace the drive
218
Содержание EtherCAT CoolDrive RC Series
