Tsino Dynatron EtherCAT CoolDrive RC Series, Руководство пользователя

Страница: 200 / 278

Tsino-Dynatron Electrical Technology (Beijing) Co., Ltd.
Charge Relay Control Function 7.11.4
Number Index Name Unit Setting range
Default
value
Effective
time
56 0x204D
Drive enabled
DC voltage
threshold
mV 1~4294967295 200000 Restart
Parameter description:
When the servo is enabled, only when the bus voltage is bigger than the set value of
0x204D, can the relay be activated to enter the servo ON state.
User permission: User/Engineer
Parameter permission: Read only
Rotor Positioning Error Detection Sensitivity 7.11.5
Number Index Name Unit Setting range
Default
value
Effective
time
96 0x20D2
Rotor Positioning Error
Detection Sensitivity
— 1~10 2 Restart
Parameter description: Set the rotor positioning error detection sensitivity. It is used for detecting the rotor
positioning error, for example, rotor position compensation angle setting error. The higher the set value, the lower
the rotor positioning error detection sensitivity, and on the contrary, it will be higher.
User permission:
User/Engineer.
Parameter permission: Read and Write
Flux weaking control 7.11.6
Number Index Name Unit Setting range
Default
value
Effective
time
160 0x20CA
Flux weaking
compensation inflection
velocity
‰VN 1000~3000 3000 Restart
Parameter description: The motor speed when the flux weaking compensation starts. Once this speed is
reached, the flux weaking compensation starts according to the set slope of the flux weaking compensation
coefficient.
User permission: User/Professional.
Parameter permission:
Read and Write
Number Index Name Unit Setting range
Default
value
Effective
time
161 0x20CB
Flux weaking
compensation coefficient
‰ 0~1000 2 Restart
181