NXP Semiconductors Kinetis KE1xZ256, Reference Manual

Page: 1231 / 1325

FLEXIO_PIN field descriptions
Field Description
31–8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
PDI Pin Data Input
Returns the input data on each of the FlexIO pins.
47.3.5 Shifter Status Register (FLEXIO_SHIFTSTAT)
.
Address: 4005_A000h base + 10h offset = 4005_A010h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 SSF
W
w1c
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FLEXIO_SHIFTSTAT field descriptions
Field Description
31–4
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
SSF Shifter Status Flag
The shifter status flag is updated when one of the following events occurs:
For SMOD=Receive, the status flag is set when SHIFTBUF has been loaded with data from Shifter
(SHIFTBUF is full), and the status flag is cleared when SHIFTBUF register is read.
For SMOD=Transmit, the status flag is set when SHIFTBUF data has been transferred to the Shifter
(SHIFTBUF is empty) or when initially configured for SMOD=Transmit, and the status flag is cleared when
the SHIFTBUF register is written.
For SMOD=Match Store, the status flag is set when a match has occured between SHIFTBUF and Shifter,
and the status flag is cleared when the SHIFTBUF register is read.
For SMOD=Match Continuous, returns the current match result between the SHIFTBUF and Shifter.
The status flag can also be cleared by writing a logic one to the flag for all modes except Match
Continuous.
0 Status flag is clear
1 Status flag is set
Chapter 47 Flexible I/O (FlexIO)
Kinetis KE1xZ256 Sub-Family Reference Manual, Rev. 3, 07/2018
NXP Semiconductors 1231