EXFO Power Blazer 88200NGE, User Manual

Page: 542 / 887

Test Results
532
88000 Series
Summary / Client Summary

Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.

Test Recovery , when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the
Test Recovery field. Refer to
Power Failure Recovery
on page 743.

Logger Full , when displayed, indicates that the logger is full. Refer to
Logger
on page 493.
Interface
Note:
Only available with CPRI/OBSAI Unframed test application.

Alarms
LOS
indicates that there is no input signal.

Errors
CV
(Code Violation) indicates that invalid 10B code word are received.
BER and Multi-Pattern BER
Note:
See
BER
on page 396 for a description of each alarm/error.
Note: For Multi-Pattern, alarms/errors are available for each pattern. An arrow in
front of a specific pattern indicates the pattern that is currently
generated/analyzed.
All represents the sum of alarms/errors as well as the
consolidated rate for all patterns.

Receiving Live Traffic - RX Pattern Analysis Disabled when
displayed, indicates that the
No Pattern Analysis (Live)
check box is
selected and in this case no other information/statistics are available.

BER Threshold
is available when
Pass/Fail Verdict
is enabled
1
. For
Multi-Channel OTN, this setting is global and applies to all Channels.