EXFO Power Blazer 88200NGE, User Manual

Page: 592 / 887

Test Results
582
88000 Series
Summary (S-OAM and MPLS-TP OAM)

RX Line Utilization meter and value, available with Loopback
function, indicate the line rate utilization percentage (only LBR frames
are considered) received in the last second.

TST RX Rate
meter and value, available with
Test
function, indicate the
quantity of TST frames received in the last second.

Frame Delay
meter and value, available with
Frame Delay
function,
indicate the average of the measured frame delays in the last second.

Frame Loss Ratio
meter, available with
Frame Loss
function,
indicates for both Near-End and Far-End the last measured frame loss
ratio in the last second.

Synthetic Loss Ratio meter, available with Synthetic Loss function
which is available with Ethernet OAM, indicates for both Near-End and
Far-End the last measured Synthetic Loss ratio in the last second.
Note:
Refer to
S-OAM and MPLS-TP OAM
on page 514 for more
alarms/errors/statistics information.
Summary
Refer to S-OAM and MPLS-TP OAM on page 514 for more information on
alarms.
Thresholds
Refer to
Thresholds
on page 308 for more information.