EXFO Power Blazer 88200NGE, User Manual

Page: 354 / 887

Test Setup - Test Configurator, Timer, and System
344
88000 Series
Signal - Signal Configuration (OTN)

Tributary Port , configurable when the Fixed Structure check box
is cleared, allows selecting the
Tributary Port
number that will be
associated to the selected tributary slots. When the Fixed
Structure
check box is selected, the
Tributary Port
is
automatically assigned to either the selected slot number or for
OPU3 to the first slot number in the column.

Nominal Bit Rate (Gbit/s) available with ODUflex and
ODUflex/GFP-F indicates the TX frequency based on the number of
tributary slots selected. Note that for ODUflex with pattern Client,
the
Nominal Bit Rate
may be affected by the
TX Rate
when not set
to 100 % (see TX Rate on page 155).

Number of Trib Slots
indicates the number of tributary slots
selected.
Note:
Tributary slots must be selected starting with the higher layer down to the
lower and all required tributary slots must be selected to access the next
level.
Clear All , Select All , and Default buttons may be used to facilitate
the selection.

Config TCM
Allows enabling each TCM level (1 to 6) individually. All ODUx of a
mapped signal are also available. All TCM check boxes are cleared by
default (disabled). Refer to
Traces (OTN) on page 370 for more
information. Not available with Multi-Channel OTN.