EXFO Power Blazer 88200NGE, User Manual

Page: 407 / 887

Test Results
Power Blazer
397
Alarms/Errors Overview

Mismatch ‘0’ (Available with EtherBERT and OTN BERT with EoOTN
client; not available with 100GE -
4 Unframed CAUI-4
and OTU4 -
4 Unframed Physical Lanes on 88200NGE.)
RX
: There is a bit error on a binary ‘0’ (for example ones that should be
zeros) found in the test pattern only.

Mismatch ‘1’
(Available with EtherBERT and OTN BERT with EoOTN
client; not available with 100GE - 4 Unframed CAUI-4 and OTU4 -
4 Unframed Physical Lanes
on 88200NGE.)
RX : There is a bit error on a binary ‘1’ (for example zeros that should be
ones) found in the test pattern only.
Clock

LOC
(Loss Of Clock)
RX : The module is unable to synchronize with the selected Clock
Mode
. No valid clock is generated/extracted to/from the EXT CLK port.

LOPPS-L and LOPPS-R (Loss Of Pulse Per Second - Local/Remote) are
only available in
One-Way Latency
measurement mode for
Dual Test
Set and eCPRI BERT (LOPPS-L).
RX
: Either no pulse is received or no pulse is received within 1 second
± 6.6 μ s after the previous pulse. LOPPS-R is only monitored once the
DTS connection is established.