EXFO Power Blazer 88200NGE, User Manual

Page: 760 / 887

Maintenance
750
88000 Series
Recycling and Disposal
To help you with calibration follow-up, EXFO provides a special calibration
label that complies with the ISO/IEC 17025 standard and indicates the unit
calibration date and provides space to indicate the due date. Unless you
have already established a specific calibration interval based on your own
empirical data and requirements, EXFO would recommend that the next
calibration date be established according to the following equation:
Next calibration date = Date of first usage (if less than six months
after the calibration date) + Recommended calibration period
(2 years)
To ensure that your unit conforms to the published specifications,
calibration may be carried out at an EXFO service center or, depending on
the product, at one of EXFO’s certified service centers. Calibrations at
EXFO are performed using standards traceable to national metrology
institutes.
Note:
You may have purchased a FlexCare plan that covers calibrations. See the
Service and Repairs section of this user documentation for more
information on how to contact the service centers and to see if your plan
qualifies.
Recycling and Disposal
For complete recycling/disposal information, visit the EXFO Web site at
www.exfo.com/recycle.
This symbol on the product means that you should recycle or dispose of your
product (including electric and electronic accessories) properly, in accordance
with local regulations. Do not dispose of it in ordinary garbage receptacles.