EXFO Power Blazer 88200NGE, User Manual

Page: 483 / 887

Test Results
Power Blazer
473
Alarms/Errors Overview
Inject Button

Layer : Allows selecting on which layer is the alarm/error to be
generated. Choices depend on the test application and its interface.
For Multi-Channel OTN using mix-mapping,
ODUk and OPUk represent
ODU and OPU levels of the selected channel(s).
The port selection available with Dual Port topology, allows selecting
the port used for alarm/error injection.

Channel , available with Multi-Channel OTN, allows selecting the
channel number that will be used for injection. The All button selects
all defined channels.

Type : Allows selecting the type of injection, either Alarms or Errors .

Defect : Allows the selection of the alarm/error defect to be generated.
Choices depend on the selected Layer and Type . Refer to
Alarms/Errors on page 391 for more information.

Mode and Rate/Amount
Note: Only Manual mode is available with 100GE - 4 Unframed CAUI-4 and
OTU4 - 4 Unframed Physical Lanes on 88220NGE; the amount is fixed to 1;
Pattern Loss injection is not possible.
Open/Close pop-up button
Selected Alarm/Error
and status