EXFO Power Blazer 88200NGE, User Manual

Page: 549 / 887

Test Results
Power Blazer
539
Summary / Client Summary

RX Frame Count indicates the number of frame received matching the
stream.

TX Rate indicates the transmitted throughput rate.

TX Frame Count
indicates the number of transmitted frames matching
the stream.

Thresholds
allows configuring the QoS thresholds:

Latency check box when selected (default) enables the latency
pass/fail verdict and allows setting the maximum threshold delay
per direction when applicable.
For One-Way Latency:
1
to
500 000 μ s
(default is
100 μ s
).
For Round-Trip Latency: 1 to 1000 000 μ s (default is 200 μ s )

Jitter
check box when selected (default) enables the jitter pass/fail
verdict and allows setting the maximum threshold value per
direction when applicable:
1
to
500 000 μ s
(default is
10 μ s
).

Frame Loss Rate check box when selected (default) enables the
Frame Loss pass/fail verdict and allows setting the frame loss rate
for the port: 0.0E-00 to 5.0E-02 (default is 1.0E-07). However
entering a value of 0.0E-00 or below 1.0E-14 is treated as a pass/fail
verdict based on loss count instead of rate.

Throughput
check box when selected (default) enables the
throughput pass/fail verdict and allows setting the minimum and
maximum threshold values for the port.

Frame Loss : See QoS Metrics on page 451. When testing with
protection switching, it is recommended to use
Generic Data Transfer
as the Message Type (refer to eCPRI on page 263).

Out-of-Sequence
: See
QoS Metrics
on page 451.