EXFO Power Blazer 88200NGE, User Manual

Page: 367 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
357
Streams - Profile
Shaping

TX Mode allows the selection of the transmission mode for the
selected stream when
Data
profile is selected. The TX Mode is forced
to Continuous for Voice and Video profiles and when using Provider
Encapsulation
.

TX Rate
/
Max TX Rate
indicates the transmission rate for Voice and
Video profiles, and allows entering the transmission rate for Data
profile. The available stream transmission rate will be calculated
according to the selected TX Mode. The default setting is 100 percent
for all interfaces at the exception of 10Gig-E WAN which is 92.8571
percent (depending on the frame format).
Unit choices are:
%
(default),
Mbit/s
,
Gbit/s
,
frame/s
,
IFG
. However
frame/s and IFG are not available for Random and Sweep frame sizes.
Continuous (default) transfers the
selected frame continuously according to
the selected percentage of bandwidth.
n-Frame transfers the selected number of
frames.
Burst transfers the selected frame at
maximum bandwidth for the selected
Burst Duty Cycle over the Period .
n-Burst transfers the selected number of
Burst.
Ramp transfers the selected bandwidth in
a stair shape according to the selected
step time, number of steps, and maximum
bandwidth.
n-Ramp transfers the selected number of
Ramp.