EXFO Power Blazer 88200NGE, User Manual

Page: 259 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
249
MAC/IP/UDP
PBB-TE : Provider Backbone Bridges with Traffic Engineering
encapsulation.

IP Version allows selecting IPv4 (default) or IPv6 that will be used
for both the interface and all streams/services.

Framing
Note:
The framing for EtherSAM in a NAT environment is limited to Ethernet II,
IPv4, and UDP.

Frame Format (layer 2) allows selecting Ethernet II (default) or
802.3 SNAP as the frame format. Only Ethernet II is available with
25G/200G/400G and eCPRI.

Network Layer
1
(layer 3) sets the network traffic type:
IPv4 (default)/ IPv6
2
, or None .

Transport Layer
1
is disabled when the Network Layer is None .
1. Not available with EtherSAM when the
S-OAM
check box selected. Not available when using Provider Encapsulation.
Not configurable and set to None for 40GE/100GE dual port topology, or when
Layer Mode
is set to
L2 Only
.
2. IPv6 is not supported with 200G/400G and eCPRI.
Test Application Transport Layer
EtherSAM None , UDP (default), TCP
a
a. Only available for 10M to 10G.
RFC 2544
eCPRI BERT UDP
EtherBERT UDP (default), TCP
a
Traffic Gen & Mon None, UDP (default), TCP
a