EXFO Power Blazer 88200NGE, User Manual

Page: 114 / 887

Selecting and Starting a Test
104
88000 Series
Fibre Channel Test Application
3d. Tap the test block to configure the specific test settings (refer to
page 183).
3e.
Tap the clock block to configure the clock synchronization (refer
to
Clock
on page 167).
4. Tap the Timer tab to automatically start and/or stop the test at a given
time or for a specific duration (refer to
Timer
on page 368).
5. Tap the Start button from the right navigation bar to start the test (refer
to
Start/Stop|TX Button
on page 741). The
Summary
result page will
be automatically displayed when the test is started from any Setup
configuration page. For additional results refer to
Test Results
on
page 385.
6. When the test ends automatically or is manually stopped, the generate
report pop-up is displayed by default. If required, tap
Yes to generate a
report of the test results and statistics (refer to
Report Button
on
page 731 for more information).