EXFO Power Blazer 88200NGE, User Manual

Page: 305 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
295
RFC 2544 - Subtests

Max. Rate is the maximum rate the test should begin with, in terms of
a percentage of the line rate (
%
),
Mbit/s
, or
Gbit/s
. For
Dual Test Set
Max. Rate is configurable for both local ( L ) and remote ( R ) directions.
For
Dual Port
topology,
Max. Rate
is configurable for both port
directions.

Trial Duration is the time for each trial in minutes:seconds: 1 second
(default) to
30
minutes.

Trials is the number of times the throughput test will be generated:
1 (default) to 50 trials.
Interface
Speed
Max. Rate
% Mbit/s Gbit/s
10 Mbit/s 0.0050 to 100.0000
a
a. Default value.
0.00001 to 10.000
a
Not Applicable
100 Mbit/s 0.0050 to 100.0000
a
0.0001 to 100.000
a
Not Applicable
1000 Mbit/s 0.0050 to 100.0000
a
0.001 to 1000.00
a
0.000001 to 1.000
a
10G LAN 0.0050 to 100.0000
a
0.01 to 10000.000
a
0.00001 to 10.000
a
10G WAN
b
b. The maximum value for 10G WAN may be lower depending on the frame size. The
maximum value will be adjusted for each frame size.
0.0005 to 92.8571
a
0.01 to 9285.71
a
0.00001 to 9.28571
a
25G 0.0050 to 100.0000
a
1.25 to 25000.00
a
0.00125 to 25.00000
a
40G 0.0050 to 100.0000
a
2.00 to 40000.0
a
0.00200 to 40.0000
a
100G 0.0050 to 100.0000
a
5.00 to 100000.0
a
0.00500 to 100.0000
a
200G 0.0050 to 100.0000
a
10.0 to 200000.0
a
0.0100 to 200.0000
a
400G 0.0050 to 100.0000
a
20.0 to 400000.0
a
0.0200 to 400.0000
a