EXFO Power Blazer 88200NGE, User Manual

Page: 159 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
149
1588 PTP

GM IP Address
1
is the IP address of the Grand Master Clock used by
the 1588 PTP function to communicate with it.

Quick Ping
1
button allows testing if the Grand Master IP address can
be reached. A message is returned indicating if the ping attempt was
Successful or Failed .

IP TOS/DS
1
allows entering the Type of Service:
0x00
(default) to
0xFF
.

Mechanism is not selectable and is set to Delay Req-Resp (Delay
Request-Response) which specifies the mechanism used by the
1588 PTP function to communicate with the Grand Master clock. Refer
to
Delay Request-Response
on page 781 for more information.

Delay Mode is not selectable and is set to Two-way which uses
Sync/Follow Up, Delay Request, and Delay Response messages.

Connect
1
button is used to initiate the Grand Master Connection
process. This process is also automatically initiated when starting the
test if not already initiated. The process automatically ends when
stopping the test.

Negotiation Status
1
is displayed during the Unicast negotiation
process which is initiated when either the test is started or the
Connect
button is activated. See Negotiation Status on page 541 for more
information.
1. Only available with Unicast mode.