EXFO Power Blazer 88200NGE, User Manual, Page: 526 / 887

Test Results
516
88000 Series
S-OAM and MPLS-TP OAM
Frame Delay

Status displays the status of the test function (refer to page 581).

TX DMM
indicates the count of transmitted DMM frames.

RX DMR indicates the count of valid DMR frames received. A valid
frame for S-OAM has its source MAC address matching the Peer MEP
MAC address; destination MAC address matching the unit port MAC
address; and VLANs matching the unit port VLANs. A valid frame for
MPLS-TP OAM has its destination MAC address matching either the unit
MAC address, FF:FF:FF:FF:FF:FF, or 01:00:5E:90:00:00; VLANs matching
the unit port VLANs; and MPLS Labels matching the local MPLS Label
Stack configuration..

Invalid DMR indicates the count of received DMR frames from the
peer MEP having an incorrect MEG/MD Level, an incorrect Test ID
(when applicable), or with a valid MEG/MD Level and valid Test ID
(when applicable) but with a Frame Delay outside the 0.001 to
8000.000 ms range.

Delay (ms)
:
Current
indicates the average of frame delay measured in
the last second. Minimum , Maximum , and Average indicates
respectively the minimum, maximum, and average frame delays
measured since the beginning of the test.

Successful
indicates the count of received DMR frames having no
errors.

Failed
indicates the count of DMR frames declared as invalid.