EXFO Power Blazer 88200NGE, User Manual

Page: 237 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
227
Interface
For Fibre Channel test application:

PSP (Link Protocol)
(Primitive Sequence Protocol) check box when
selected (default) allows link management by activating the port.
For CPRI
Unframed
test application:

Scrambling check box when selected (default) enables the scrambler.
Only available with CPRI rates 4.9152 Gbit/s and higher.
For CPRI Framed L2 test application:

Sequence
indicates the last Startup Sequence State:
Standby (A)
,
L1 Sync (B) , Protocol (C) , L2 C&M (D) , Vendor (E) , Operation (F) ,
or
Passive (G)
.
Frame Sync
indicates the synchronization status: green
for active, red for inactive, or gray for pending.

Protocol
defines how the CPRI Startup Sequence negotiates the
protocol version.

Auto
can use protocol
Version 1
and
Version 2
during the
negotiation.

Version 1
negotiates the protocol with either Scrambling disabled
for all supported CPRI rates with the exception of 10.1 for which
the Scrambling is enabled.

Version 2 negotiates the protocol with Scrambling enabled.
Available with CPRI rates: 9.8, 6.1, and 4.9 Gbit/s.
Protocol table indicates either the last received ( Version 1 or
Version 2
) or negotiated (
Auto
) protocol version. A light-red
background indicates a Protocol version mismatch between the
received value and the expected generated value.