EXFO Power Blazer 88200NGE, User Manual

Page: 534 / 887

Test Results
524
88000 Series
Service Configuration - Ramp
Service Configuration - Ramp
From the
Test
menu, tap
Results
,
Service Configuration
, and the
Ramp
tab.
Service Name and Selection
Service Name indicates the name of the selected service. Select the
service to be displayed by either using the left/right arrow or by tapping
over the service numbers area then tapping on a specific service number.
An orange background indicates the selected service while a green
background indicates the services that are enabled.
Committed/Excess Steps

Committed Steps indicate the pre CIR and CIR steps specified in the
ramp configuration.

Excess Steps indicate the CIR+EIR and Traffic Policing steps
specified in the ramp configuration.

Direction , available with Dual Test Set or Dual Port topology,
indicates respectively results for local (
L
) and remote (
R
) directions, or
for both port directions.

TX Rate
indicates the transmission rate for each step.

SLA Verified indicates the committed SLA parameters that are used to
declare the pass/fail verdict. See
Summary (EtherSAM)
on page 551 for
more information on Frame Loss Rate , Max Jitter , Round-Trip
Latency
, and
Max RX Rate
.