EXFO Power Blazer 88200NGE, User Manual

Page: 495 / 887

Test Results
Power Blazer
485
GFP-F/GFP-T

Reserved PTI indicates the received client data and management
frames with a payload type identifier different of 000 and 100 without
uncorrectable cHEC, tHEC, and eHEC, and pFCS errors. Possible rate
units are
Frames
(default), or
Bytes
per second.

Reserved PLI indicates the number of reserved control frames (PLI=1,
2, or 3 while in Synchronization state) received.

Invalid indicates the number of received frames corresponding to at
least one of the following conditions:
EXI=0000 while PFI=1 and PLI <8
EXI=0001 while PFI=0 and PLI <8
EXI=0001 while PFI=1 and PLI<12

Discarded
indicates the number of received frames with
uncorrectable tHEC, eHEC errors, or Invalid Frames.

Total
indicates the received frames including Idle, Client Data, Client
Management, and frames with a reserved PTI. Possible rate units are
Frames
(default), or
Bytes
per second.
RX Mismatch

PFI
(Payload Frame Check Sequence Identifier) indicates the number
of frames with PFI field not matching the expected PFI.

EXI
(Extension Header Identifier) indicates the number of frames with
EXI field not matching the expected EXI.

UPI
(User Payload Identifier) indicates the number of frames UPI field
not matching the expected UPI.

CID
(Channel IDentifier), only available when EXI is et to
Linear
,
indicates the number of frames CID field not matching the expected
CID.
Note: For expected values, refer to GFP-F/GFP-T on page 222 for more
information.