EXFO Power Blazer 88200NGE, User Manual

Page: 377 / 887

Test Setup - Test Configurator, Timer, and System
Power Blazer
367
Test Sequence (iOptics)
Test Sequence (iOptics)
From the
Test
menu, tap
Setup
, and
Test Configurator
.

Power Threshold (W)
1
indicates the power consumption threshold
based on the power level/class detected including uncertainty from the
selected transceiver to declare the pass/fail verdict. Not available on
8870 and 8880 modules.
Power Consumption Pass/Fail Verdict
1
check box when selected
(default) enables the power consumption pass/fail verdict based on
the
Power Threshold (W) value. In the case where a vendor optical
devices overcome the Power Class they are assigned to, clear this
check box to avoid reporting a fail verdict.

Temp. Threshold (
o
C)
1
allows selecting the temperature threshold to
declare the pass/fail verdict: 0 to 75
o
C (default is 70
o
C) .

TX Power Range (dBm)
1
indicates, when supported, the optical
device TX operational range to declare the pass/fail verdict.

RX Power Range (dBm)
1
indicates the optical device RX operational
range to declare the pass/fail verdict.

BERT Duration
is the time duration of the bit error test:
1 minute (default), 2 , 3 , 4 , 5 , or 30 minutes .

BERT Threshold
indicates the bit error test threshold (set to
0
) to
declare the pass/fail verdict.

Skew Threshold (Bits)
, available with parallel interfaces, indicates the
skew threshold that is automatically set based on the rate to declare
the pass/fail verdict.
1. Not available when PHY Type is set to DAC.