EXFO Power Blazer 88200NGE, User Manual

Page: 416 / 887

Test Results
406
88000 Series
Alarms/Errors Overview

Client Frequency (available with EoOTN 1GbE client)
RX
: The received client signal rate doesn’t meet the standard rate
specification of 1250000000 ± 150000 bps (± 120 ppm).
Errors

Symbol
1
RX/TX
: Invalid code-group is detected/generated in the code.

Idle
1
RX
: An error is detected between the end of a frame and the beginning
of the next frame.

False Carrier
1
RX : Data is being received with invalid start of frame.

Block
(available with Ethernet 10G LAN/WAN interface)
RX : Error block received in frames.

Alignment
(available with 10/100 Mbit/s interface)
RX : Frames without an integral number of octets in length are
received.

FCS (Frame Check Sequence)
RX
: Frames with an invalid FCS are received.

Jabber
RX
: Frames larger than 1518 bytes
2
with an invalid FCS are received;
1534 bytes
3
for EoE; 1536 bytes
4
for PBB-TE.
1. Available with Ethernet 100/1000 Mbit/s interface, and EoOTN 1GbE client.
2. Add 4 bytes to this value for each VLAN layer enabled.
3. Add 4 bytes to this value for each VLAN layer enabled in the encapsulated Ethernet payload and 4 bytes for EoE
VLAN when enabled.
4. Add 4 bytes to this value for each VLAN layer enabled in the encapsulated Ethernet payload and 4 bytes for B-VLAN
when enabled.