EXFO Power Blazer 88200NGE, User Manual

Page: 374 / 887

Test Setup - Test Configurator, Timer, and System
364
88000 Series
Transceiver System (TA/TA4)
Transceiver System (TA/TA4)
Gives the transceiver system insertion counter and information on the
inserted transceiver system.
From the
Test
menu:

For iOptics, tap Setup , Test Configurator , tap More... from the Device
Under Test
block, and on the
Transceiver System
tab.

For other tests, tap Setup , Test Configurator , tap on the interface
block and on the transceiver system (
TA/TA4-...
) tab.

For TA-SYNC, tap Setup , Test Configurator , tap on the clock block and
on the
TA-SYNC
tab. This tab is not displayed when Ext Clock Out is set
to None .
Port

Transceiver System Insertion Counter indicates the number of time a
transceiver system has been inserted into this FTBx module port.

Transceiver System Parameters are as follows:

ID
indicates the name of the transceiver system.

Serial Number indicates the serial number of the transceiver
system.

Revision indicates the hardware revision of the transceiver system.

Battery
1
indicates the status level of the battery:
Good
,
Low
, or
Depleted .

Optical Module Insertion Counter
1
indicates the number of time
an optical transceiver has been inserted into this transceiver
system port.
1. Not available with TA-SYNC.