EXFO Power Blazer 88200NGE, User Manual

Page: 242 / 887

Test Setup - Test Configurator, Timer, and System
232
88000 Series
Interface
WIS Button
Note: WIS is only available for 10GE WAN interface.

J0 Trace
allows setting the
J0 Trace
value in 16 bytes format (default is
EXFO 10GigE ).

J1 Trace
allows setting the
J1 Trace
value in 16 bytes format allowing
up to 15 bytes (a CRC-7 byte will be added in front for a total of
16 bytes). Default is
EXFO 10GigE
.
Note: J0 and J1 values should be 7-bit T.50 suitable characters. The Padding drop
list from the message keyboard allows selecting Null or Space to fill up the
J0 Trace and J1 Trace up to15-byte value. The Control Characters button
in the J0 Trace and J1 Trace message keyboard, allows selecting the
required character. For more details on Control Characters , see page 46.

Path Signal Label (C2)
byte is allocated to indicate the content of the
STS SPE, including the status of the mapped payload.
C2 (Hex.) Description
00 Unequipped
01 Equipped - Non-Specific
1A
a
a. Default value.
10 Gbit/s Ethernet (IEEE 802.3)
FE Test Signal, ITU-T 0.181