EXFO Power Blazer 88200NGE, User Manual

Page: 35 / 887

Physical Interfaces and LEDs
Power Blazer
25
Port Availability per Module
Port Availability per Module
88200NGE
The following table shows the list of available ports as well as a description
and the signals supported on the module.
Port
Labelled
Description Supported Signal(s)
SFP+ Optical IN/OUT port SFP/SFP+
transceiver Ethernet 100/1000 Mbit/s, 10 Gbit/s optical
Ethernet 10/100/1000 Mbit/s electrical (using active copper SFP)
Fibre Channel 1X, 2X, 4X, 8X, 10X, 16X
eCPRI 10 Gbit/s
CPRI 1.2, 2.4, 3.1, 4.9, 6.1, 9.8, 10.1 Gbit/s
OBSAI 1.5, 3.1, 6.1 Gbit/s
OC-1/STM-0, OC-3/STM-1, OC-12/STM-4, OC-48/STM-16,
OC-192/STM-64
OTU1, OTU2, OTU1e, OTU2e, OTU1f, OTU2f.
CFP4 Optical IN/OUT port CFP4
transceiver
a
a. Only OTU4 (4 Lanes) and 100GE (4 Lanes) are supported.
Ethernet 100 Gbit/s
OTU4
QSFP
(QSFP+ or
QSFP28) Optical IN/OUT port QSFP+
transceiver
b
b. Only parallel interfaces are supported.
Ethernet 40 Gbit/s
OTU3e2, OTU3e1, OTU3
Optical IN/OUT port QSFP28
transceiver
a
Ethernet 100 Gbit/s
OTU4
REF OUT Electrical port SMA for eye
diagram clock signal
generation
EXT CLK Electrical port SMB for
external clock synchronization DS1/1.5M, E1/2M, 2MHz, 1PPS
c
c. Available for
Dual Test Set - One-Way Latency
measurement mode.