EXFO Power Blazer 88200NGE, User Manual

Page: 406 / 887

Test Results
396
88000 Series
Alarms/Errors Overview
BER
Alarms

No Traffic
(Available with EtherBERT or OTN BERT with EoOTN client)
RX :
Ethernet: No pattern traffic has been received in the last second.
Fibre Channel: No traffic is being transmitted when Login Management
fails; a pop up displays
No Data is being transmitted on Port(s)
<port number>. The Login process has failed .

Pattern Loss
RX :
Ethernet: More than 20 percent of bit errors are received or the
reference sequence can be unambiguously identified as out of phase.
However, for OTU4 -
4 Unframed Physical Lanes
and 100GE -
4 Unframed CAUI-4 , bit error rate is greater than 2.5x10
-3
.
Fibre Channel: bit error is detected on four consecutive words.

Client Frequency (Available for ODUflex with Pattern client)
RX
: The received client signal rate doesn’t meet the nominal bit rate
configured ± 100 ppm (refer to Nominal Bit Rate on page 344).
Errors

Bit Error
RX
: There are logic errors in the bit stream (i.e., zeros that should be
ones and vice versa). Only the count and rate values are reported for
unframed test 40GE/OTU3 and up.

Pattern Error
RX
: Indicates a block mismatch. Available with
Seed A
or
Seed B
pattern.