Siemens SIMATIC ET 200AL, System Manual

Page: 618 / 2255

Parameters/address space
4.2 Parameters
Analog input module AI 4xU/I/RTD 4xM12 (6ES7144-5KD00-0BA0)
Equipment Manual, 08/2021, A5E32350124-AG
21
4.2 Parameters
Parameters of the analog input module AI 4xU/I/RTD 4xM12
The table below lists the parameters that can be set. The effective range of the parameters
that can be set depends on the type of configuration. The following configurations are
possible:
•
Distributed operation on PROFINET IO
• Distributed operation with PROFIBUS DP
NOTICE
Match of encoder and parameters
The default setting of the analog inputs is voltage measurement (1 V to 5 V).
Make sure that the connected encoders and the selected parameters match.
The connected encoder can be destroyed in the case of incorrect parameters.