Siemens SIMATIC ET 200AL, System Manual

Page: 730 / 2255

Technical specifications
Analog output module AQ 4xU/I 4xM12 (6ES7145-5ND00-0BA0)
28
Equipment Manual, 08/2021, A5E38687953-AC
Article number 6ES7145-5ND00-0BA0
Errors/accuracies
Output ripple (relative to output range, band-
width 0 to 50 kHz), (+/-)
0.02 %
Linearity error (relative to output range), (+/-) 0.1 %
Temperature error (relative to output range), (+/-) 0.005 %/K
Crosstalk between the outputs, max. -70 dB
Repeat accuracy in steady state at 25 °C (relative
to output range), (+/-)
0.03 %
Operational error limit in overall temperature
range
• Voltage, relative to output range, (+/-)
0.25 % from 55 °C to -25 °C and 0.35 % to -30 °C
• Current, relative to output range, (+/-)
0.25 %
Basic error limit (operational limit at 25 °C)
• Voltage, relative to output range, (+/-)
0.15 %
• Current, relative to output range, (+/-)
0.15 %
Interrupts/diagnostics/status information
Substitute values connectable Yes; channel by channel, parameterizable
Alarms
• Diagnostic alarm
Yes; Parameterizable
Diagnoses
• Wire-break
Yes; channel-by-channel, only for output type
"current"
• Short-circuit
Yes; Actuator supply module by module; channel
by channel for output type "voltage"
Diagnostics indication LED
• Channel status display
Yes; green LED
• for module diagnostics
Yes; green/red LED
Potential separation
between the load voltages Yes
Potential separation channels
• between the channels
No
• between the channels and backplane bus
Yes
• between the channels and the power supply
of the electronics
No
Isolation
Isolation tested with 707 V DC (type test)
Degree and class of protection
IP degree of protection IP65/67