Siemens SIMATIC ET 200AL System Manual Download Page 30

Page: 30 / 2255

Mounting

4.2 Mounting modules

Distributed I/O system

System Manual, 08/2021, A5E31861578-AJ

Drill holes of the modules

All modules of the ET 200AL distributed I/O system feature a uniform drill pattern.
•

All module housings are axisymmetrical.

•

The distance between the top and bottom drill hole is identical for all modules.

Mounting interface module and 45 mm I/O modules (front)

Watch video sequence (

https://support.industry.siemens.com/cs/ww/en/view/95886672

)

The interface modules and the 45 mm I/O modules have an attachment point on top and on

the bottom.
To mount an interface module or 45 mm I/O module, follow these steps:
1.

Drill 2 fastening holes with 4.5 mm diameter at a distance of 149.6 mm.

Fasten the interface module or the 45 mm I/O module with the screws to both fastening

points (tightening torque 1.2 Nm).

The figure below shows the dimensions for fastening the IM 157-1 PN interface module and

the DQ 8x24VDC/2A 8xM12 45 mm I/O module.

Figure 4-2

Dimensions for mounting interface modules and 45 mm I/O modules

Summary of Contents for SIMATIC ET 200AL
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMATIC ET 200AL

Reviews:

Related manuals for SIMATIC ET 200AL

Brands by name

Popular brands

Siemens SIMATIC ET 200AL, System Manual

Search results

Summary of Contents for SIMATIC ET 200AL

Reviews:

Related manuals for SIMATIC ET 200AL

Brands by name

Popular brands