Siemens SIMATIC ET 200AL, System Manual

Page: 126 / 2255

Accessories/spare parts
C.2 Cables
Distributed I/O system
124
System Manual, 08/2021, A5E31861578-AJ
Cables of power supply standard and PUR cable
The cables for the power supply are available in the following versions and lengths:
•
Power cable (4-wire), pre-assembled on both sides with a 4-pole M8 pin connector/socket
connector
– available lengths: 0.19 m, 0.3 m, 1 m, 2 m, 5 m, 10 m, 15 m
• Power cable (4-wire), pre-assembled on both sides with a 4-pole M8 pin connector/socket
connector, angled
– available lengths: 0.3 m, 1 m, 2 m, 5 m, 10 m, 15 m
• Power cable (4-wire), pre-assembled on one side with 1x M8 socket connector
– available lengths: 2 m, 5 m, 10 m, 15 m
The following table shows the technical properties of the power supply cable, standard.
Table C- 12 Cables for power supply
General information
Product type designation POWER CABLE M8
Function For connection of ET 200AL for 24 V DC power
supply
Degree of protection and protection class
IP65 Yes
IP67 Yes
Ambient conditions
Ambient temperature during mounting
minimum
-30 °C
maximum 80 °C
Storage/transport temperature
Ambient temperature during transport and storage
minimum
-40 °C
maximum 80 °C
Cables
Cable designation 4 Li9Y 0.50 mm² Y
Number of electrical wires 4
Outside diameter of the inner conductor 0.8 mm
Outside diameter of the wire insulation 1.46 mm
Outside diameter of the cable sheath 5.2 mm
Number of bending cycles 2500000; Trailing-chain suitable for 2.5 million
bending cycles with a bending radius of 52 mm, a
speed of 3 m/s² and an acceleration of 10 m/s²
Permissible bending radius
One time bending, min.
26 mm
Multiple bending, min. 52 mm
Constant bending 52 mm
Color of the cable sheath Gray
Color of the wire insulation of the power wires White, brown, blue black
Weight per length 44 kg/km