Siemens SIMATIC ET 200AL, System Manual

Page: 1641 / 2255

Parameter assignment/addressing
3.5 Configuring topology
PROFINET with STEP 7
76
Function Manual, 05/2021, A5E03444486-AL
3.5.5 Apply the port interconnections identified online manually to the project
Requirements
You have run an offline/online comparison in the topology view. The result of this is that at
least one device identified online was automatically assigned to a configured device, but that
there are differences relating to the interconnection.
Procedure
To adopt one more port interconnections identified online in the project manually, follow
these steps:
1.
Select the row belonging to the port interconnection.
2. If applicable, select further roles using multi-selection.
3. Select "Apply" > "Use selected" in the shortcut menu.
The content of the corresponding table cells in the "Action" column changes to "Apply".
4. If you have mistakenly prepared too many port interconnections to be included in the
project:
Select the rows belonging to the port interconnections you have mistakenly prepared for
inclusion in the project using multi-selection.
Select "Reset" > "Reset selected" in the shortcut menu.
The content of the corresponding table cells in the "Action" column change to "No action".
5. Click the "Synchronize" button.
Result
The port interconnections identified online for the corresponding devices are included in the
project. Successful adoption is indicated by the diagnostics icon "Identical topology
information" for each port.
Note
If other port interconnections are recognized for a device identified online and these differ
from those that exist in the project, adopting these in the project means that the port
interconnections that were previously in the project are replaced by those identified online. If
no port interconnections are detected for a device identified online, adopting in the project
means that all the port interconnections of this device are deleted in the project.