Siemens SIMATIC ET 200AL, System Manual

Page: 761 / 2255

Parameters/address space
4.2 Explanation of the parameters
CM 4xIO-Link 4xM12 (6ES7147-5JD00-0BA0)
Equipment Manual, 04/2021, A5E32352322-AE
2 2
Configuration options of the communication module CM 4xIO-Link 4xM12
The CM 4xIO-Link 4xM12 communication module supports a variable address space for I/O
data.
The following table provides an overview of the configuration options for the supported
address spaces for I/O data:
Table 4- 3 Configuration options of the communication module CM 4xIO-Link 4xM12
Module configuration/
supporting address space for I/O
data
IO-Link Master
with Firmware
V1.0
IO-Link Master
with Firmware
V1.1
IO-Link master
with firmware
V1.2
1-byte input/1-byte output X
2-byte inputs/2-byte outputs X
4-byte inputs/4-byte outputs X X* X*
8-byte inputs/0-byte outputs X X
8-byte inputs/8-byte outputs X X X
12-byte inputs/8-byte outputs X X
16-byte inputs/16-byte outputs X X X
20-byte inputs/16-byte outputs X X
32-byte inputs/32-byte outputs X X X
36-byte inputs/32-byte outputs X
48-byte inputs/48-byte outputs X
52-byte inputs/48-byte outputs X
64-byte inputs/64-byte outputs X
68-byte inputs/64-byte outputs X
80-byte inputs/80-byte outputs X
84-byte inputs/80-byte outputs X
96-byte inputs/96-byte outputs X
100-byte inputs/96-byte outputs X
112-byte inputs/112-byte outputs X
116-byte inputs/112-byte outputs X
128-byte inputs/128-byte outputs X
132-byte inputs/128-byte outputs X
* No PortQualifierInformation is transferred with this configuration.
Port configuration
You can use a CM 4xIO-Link 4xM12 communication module as of firmware version V1.1 to
commission the IO-Link ports of the IO-Link master or the connected IO-Link devices in two
different ways:
• Port configuration without S7-PCT
• Port configuration with S7-PCT