Omron SYSDRIVE MX2 SERIES, User Manual

Page: 69 / 620

2 - 9
2 Design
Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
2-
2 Rem
o
val o
f Each
Part
2
2-
2-3 Pr
ep
ar
ing Backing Plate
Note For the description of the data display and operation keys, refer to Section 3 Operation and Test Run .
For the inverters with 5.5 kW or higher capacity, before wiring, cut off the connecting points between the
backing plate and unnecessary portions with nippers or a wire cutter.
Charge Indicator Lights up even after power supply shutoff if the main circuit DC voltage (between the
terminal P/
+
2 and terminal N/
−
) is approximately 45 V or higher. Make sure the
charge indicator is not lit before wiring etc.
2-2-3 Preparing Backing Plate
Inverter with 5.5 kW or Higher Capacity
Name Description
Unnecessary portion
Connecting point