Omron SYSDRIVE MX2 SERIES, User Manual

Page: 324 / 620

7 Other Functions
7 - 14 Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
Set the frequency reference in the 1st/2nd Frequency Reference Selection (A001/A201).
Alternatively, you can switch the frequency reference via a multi-function input terminal or from a com-
munications option unit.
The Frequency Reference Source Monitor displays the frequency reference source enabled for the
inverter.
Set the RUN command in the 1st/2nd RUN Command Selection (A002/A202).
Alternatively, you can switch the RUN command via multi-function input or from a communications
option unit.
The Run Command Source Monitor displays the RUN command source enabled for the inverter.
Use this function to display the number of inverter trips.
This count value will be saved to the inverter’s EEPROM when the power supply is turned OFF.
7-1-25 Frequency Reference Source Monitor [d062]
Parameter
No.
Function name Data
Default
data
Unit
d062
Frequency Reference
Source Monitor
0: Digital Operator (F001)
− −
1 to 15: Multi-step speed reference 1 to 15
16:
Jogging frequency
18: Modbus communication
19: Option
21: Volume (3G3AX-OP01)
22: Pulse train frequency
23: Operation function output
24: DriveProgramming
25: Analog voltage input [FV]
26: Analog current input [FI]
27: Analog Input [FV]
+
[FI]
7-1-26 Run Command Source Monitor [d063]
Parameter
No.
Function name Data
Default
data
Unit
d063
Run Command Source
Monitor
1: Control circuit terminal block
− −
2: Digital Operator
3: Modbus communication
4: Option
7-1-27 Fault Counter [d080]
Parameter
No.
Function name Data
Default
data
Unit
d080 Fault Counter
0. to 9999.
−
time
1000 to 6553 (Displayed in increments of
10 times)