Omron SYSDRIVE MX2 SERIES, User Manual

Page: 396 / 620

7 Other Functions
7 - 86 Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
The starting contact signal will be output while the inverter is ready to accept the RUN command.
The output is enabled independently of the 1st/2nd RUN Command Selection (A002/A202) setting.
The inverter will stop if the FW and RV signals are input simultaneously.
This function monitors the temperature of the cooling fin located inside the inverter and outputs a signal
if the temperature is at or higher than the Cooling Fin Overheat Warning Level (C064).
7-8-16 Starting Contact Signal (FR)
Parameter
No.
Function name Data
Default
data
Unit
C021, C022 Multi-function Output P1/P2 Selection 41: FR (Starting contact sig-
nal)
− −
C026
Multi-function Relay Output (MA, MB)
Function Selection
7-8-17 Cooling Fin Overheat Warning (OHF)
Parameter
No.
Function name Data
Default
data
Unit
C064 Cooling Fin Overheat Warning Level
0. to 110.
Set the temperature at which
to the overheat warning signal
is output.
100. °C
C021, C022 Multi-function Output P1/P2 Selection 42: OHF (Cooling fin over-
heat warning)
− −
C026
Multi-function Relay Output (MA, MB)
Function Selection
Forward command (FW)
Starting contact (FR) output
Reverse command (RV)