Omron SYSDRIVE MX2 SERIES, User Manual

Page: 113 / 620

3 - 5
3 Operation and Test Run
Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
3-1 Operat
ion
of
Digit
al Operat
or
3
3-
1-1 Par
t Names and D
escriptions
Precautions for Correct Use
• The color scheme of the Digital Operator keys was changed.
Operate the keys correctly according to the following information on the displays and colors.
Mode key When parameter is displayed: Moves to the beginning of the next
parameter group.
When data is displayed: Cancels the setting and returns to
the parameter display.
In individual input mode: Moves the blinking position one
digit to the left, if not located at the
leftmost digit. At the leftmost digit,
moves the blinking position to the
rightmost digit.
Regardless of the display, if you press the Mode key for 3 seconds
or more, the data of Output Frequency Monitor (d001) is displayed.
Enter key In parameter display mode: Switches to the data display.
In data display mode: Enters and stores the set value
(into the EEPROM) and returns to
the parameter display.
In individual input mode: Enters the value in the blinking posi-
tion and moves it one digit to the right.
Increment key Increases the parameter number or the set data value. Press and
hold the key to quickly increase the number or value.
Press the increment key and the decrement key simultaneously to
enter the individual input mode, where you can edit the value in
each digit independently.
Decrement Key Decreases the parameter number or the set data value. Press and
hold the key to quickly decrease the number or value.
Press the increment key and the decrement key simultaneously to
enter the individual input mode, where you can edit the value in
each digit independently.
USB connector The connector (mini-B type) for connecting a computer.
Used to connect to the Inverter/Servo support tool CX-Drive
RJ45 connector The connector (RS-422) for connecting the optional remote Digital
Operator. When the inverter is connected with a remote Digital
Operator, its Digital Operator keys are disabled. In this case, set the
data displayed on the display in b150.
Display Name Previous model 3G3MX2-V1 Series
RUN key Gray Green
STOP/RESET key Yellow Red
Mode key Blue Blue (No change)
Enter key Yellow Yellow (No change)
Increment key Green Gray
Decrement Key Green Gray
Display Name Description